7.25 HS HT-80
Casing / Drill Pipe Tong: 2⅜ - 7 1/4 in.Safe efficent means of running drill pipe!
Views
- 80,000 ft-lbs (108465.4 Nm) Maximum Torque
- 70,000 ft-lbs (94907.3 Nm) Continuous Rotational Torque
- Flexible Choice of Torque & RPM with
Hydra-Shift® Motor and Two Speed Gear
Train, (4) Torque Levels / (4) RPM Speeds - Hydra-Shift® Speed Shifting
- Quick Changing Sliding Heads
- Rig Dies, Wrap-Around Dies, Steel Fine Tooth, Coarse Tooth, and True-Grit for running Chrome (Cra) Tubulars
- Self Aligning Throat
- Radial Lock Door with Hydraulic Door Actuator
- Wedge Drive Tri-Grip® Backup (3) Head Design
- Technical Specification Sheet
- True-Grit Wrap-Around Dies
- True-Grit Rig Dies
- Chrome Running Procedures
NEW for 2016! Eckel 7.25 Hydra-Shift® HT-80 Tong - Casing and Drill Pipe Tong
The new 7.25 HS HT-80 for Drill Pipe and High Torque Casing Tong takes on the toughest job with make-up and break-out of drill pipe, drill collars, and high torque casing with a maximum torque of 80,000 ft-lbs. The 7.25 HS HT-80 is available with a two-speed Hydra-Shift® motor coupled with a two-speed gear train providing (4) torque levels and (4) RPM speeds. The variable speeds can slowly or quickly spin tubular 2⅜ through 7¼ inch as necessary. Having exceptional gripping capabilities with rig dies for drill pipe or wrap-around dies that securely encompass the tubular limit potential for damage. The 7.25 HS HT-80 is also available with Eckel Pyramid Fine Tooth dies, or True-Grit dies. The 7.25 HS HT-80 is another of our tongs models that exceed the competition in its class.
| Tong Specifications | |
| Capacity | 2⅜ - 7-1/4 in. (60.3 - 184.2 mm) |
| Dimensions | 40 x 70 in. (1016.0 x 1778.0 mm) |
| Weight[1] | 4,450 lb (2018.5 kg) |
| Maximum Torque @ 2,500 psi (172 bar) | |
| High-High | 8,000 ft-lb (10846.6 Nm) |
| High-Low | 20,000 ft-lb (27116.4 Nm) |
| Low-High | 34,000 ft-lb (46097.8 Nm) |
| Low-Low | 80,000 ft-lb (108465.4 Nm) |
| Maximum RPM @ 65 GPM (246 LPM) | |
| High-High | 38 rpm |
| High-Low | 16 rpm |
| Low-High | 10 rpm |
| Low-Low | 3.5 rpm |
| Handle Length | 42 in. (10668.8 mm) |
| Wedge Drive Tri-Grip®Backup Specifications | |
| Capacity | 2⅜ - 8 in. (60.3 - 203.2 mm) |
| Dimensions | 43 x 70 in. (1092.2 x 1778.0 mm) |
| Weight[1][2] | 6,750 lb. (3061.7 kg) |
| Handle Length[2] | 42 in. (1066.8) |
| Load Cell Type | Compression or Tension |
[1]Weight Approximate, [2]Tong and Backup
Based in United States
Local time:
Date:
Sales Question or Technical Support?
Eckel Sales Representative
8035 North County Road WestOdessa, TX 79707
Ph: +1(432) 362-4336
Fax: +1(432) 362 1827
sales@eckel.com