9 7/8 HS HT-75

Casing / Drillpipe Tong: 3½ - 9 7/8 in.

Exceptional gripping on all sizes! Narrow Body design with robust torque.
  • 75,000 ft-lbs (101686.4 Nm Nm) maximum torque
  • 50,000 ft-lbs (67790.9 Nm) Continuous Rotational Torque
  • Flexible choice of torque & RPM with
    Hydra-Shift® motor and two speed gear
    Train, (4) Torque Levels / (4) RPM Speeds
  • Hydra-Shift® speed shifting
  • Choice of sliding head or pivot head
  • Rig dies, wrap-Around dies, steel fine tooth, coarse tooth, and True-Grit®
  • Self aligning throat
  • Radial lock door with hydraulic door actuator
  • Optional Wedge Drive Tri-Grip® Backup (3) Head Design
Slide Head Model:
Product Description

9 7/8 HS HT-75 Tong

High Performance

Providing a maximum torque of 75,000 ft-lbs (101686 Nm) and 50,000 ft-lbs (67790.9 Nm) continuous rotational torque; well suited for today's high torque premium casing connections. With this high torque rating, the 9&frac78 HS HT-75 Casing / Drillpipe Tong is capable of properly handling all premium grade tubulars within its size range.

Exceptional Gripping Capabilities

The 9&frac78 HS HT-75 Casing Tong offers exceptional gripping capabilities handling tubular size from 3½ - 9&frac78 in. (88.9 - 250.8) and WD Tri-Grip® Backup size 3½ - 11 in. (88.9 - 279.4). An innovative design allows for you to choose either sliding heads or pivot heads configuration upon order. Wrap-Around dies are offered which securely encompass the tubular to limit potential for damage. Therefore, you are assured of your down hole tubular connection integrity.

Torque Turn Readings

Available with a two-speed Hydra-Shift® motor for a smooth speed shifting without stopping. A WD Tri-Grip® Backup is offered for make-up and break-out of the most resilient connections. These two design features provide excellent torque turn graphic readings. Additionally a two-speed gear train is provided for (4) Torque Levels and (4) RPM Speeds.

Wedge Drive Tri-Grip® Backup

The WD Tri-Grip® Backup is a high performance no compromise backup that is suitable for make-up and break-out of the most resilient connections. The WD Tri-Grip® Backup features a three head design that encompasses the tubular that applies an evenly distributed gripping force. The backup can handle tubular from 3½ in. to 11 in. (88.9 - 279.4 mm). A constant radial load is applied when a single wedge drive to actuate the front two pivot heads with a third stationary head providing a reactionary force to provide superior gripping performance. Wedge Drive Tri-Grip® Backup has exceptional gripping capabilities with Rig Dies when running drill pipe or optional Eckel Wrap-Around True-Grit® dies or Pyramid Fine Tooth dies for making up other types of tubular.

Technical Specifications
Tong Specifications
Capacity3½ - 9 7/8 in. (88.9 - 250.8 mm)
Dimensions34 x 73 in. (863.6 x 1854.2 mm)
Weight[1]4,500 lb. (3039.1 kg)
Maximum Torque @ 2,700 psi (186 bar)
High-High5,500 ft-lb (7457.0 Nm)
High-Low15,000 ft-lb (20337.3 Nm)
Low-High29,000 ft-lb (39318.7 Nm)
Low-Low75,000 ft-lb (101686.4.5 Nm)
High-High77 rpm
Low-High12 rpm
Low-Low4.5 rpm
Handle Length47.5 in. (1206.5 mm)
Backup Specifications
Backup TypeTri-Grip®
Capacity3½ - 11 in. (88.9 - 279.4 mm)
Dimensions[2]36.5 x 73 in. (927.1 x 1854.2 mm)
Weight[1][2]6,500 lb. (2721.5 kg)
Load Cell Type Compression
Handle Length[2]42.5 in. (1079.5 mm)

[1]Weight Approximate, [2]Tong and Backup

Product Support

Based in United States

Local time:


Sales Question or Technical Support?

Eckel Sales Representative

8035 North County Road West
Odessa, TX 79707

Ph: +1(432) 362-4336
Fax: +1(432) 362 1827